Mackie MR Series Powered Active Studio Monitor Speakers with Acoustic Foam Pad, Polishing Cloth, Ebook & Warranty - Single

Designed for superior mix translation and accuracy for professional results in any studio

The Bundle Includes all the essentials the user needs for optimal speaker performance, right out of the box.

It includes :

• Mackie MR 524 Active Studio Monitors 
  
• Monitor Isolation Pads- to eliminate vibrational hum off your desk surface, providing improved clarity and bass response (place speakers on pads)
• Bajaao Ebook guide for Studio Essentials
• Bajaao 3-meter, Standard 1/4 TRS cables, – to connect your speakers to audio interface or any audio output - Pair
• 2 Year Bajaao Standard Warranty Support

Features:

• Equipped with Mackie’s proven logarithmic waveguide design
• Ultra-wide dispersion for enhanced stereo imaging and listening sweet spot
• Precise acoustic alignment offers incredibly balanced sound across the entire frequency spectrum
• 1” silk dome tweeter provides fast transient response for detailed high end and vocal clarity
• Optimize MR monitors for your mixing environment
• Adjustable acoustic space filters maintain flat response in typical placement configurations
• HF filter applies boost or cut to compensate for particularly dull or bright sounding rooms
• Professional all-wood cabinet design built to last and look great in any studio
• Custom designed internal bracing adds stiffness for reduced distortion and enhanced low-frequency response
• Flexible inputs for simple connection to almost any audio source
• Acoustically optimized with sound-tightening acoustic absorption material

MR524

• 5” polypropylene woofer delivers responsive, dynamic low-frequency response
• 50 watts of bi-amplified Class A/B amplification
• Frequency response: 45 Hz – 20 kHz

MR624

• 6.5” polypropylene woofer delivers responsive, dynamic low-frequency response
• 65 watts of bi-amplified Class A/B amplification
• Frequency response: 38 Hz – 20 kHz

Specifications:
Acoustic Performance
Frequency Response (–3 dB):

• 57 Hz – 20 kHz [MR524]
• 45 Hz – 20 kHz [MR624]

Frequency Response (–10 dB):

• 45 Hz – 20 kHz [MR524]
• 38 Hz – 20 kHz [MR624]

Sound Pressure Level @ 1 meter, +4 dBu into Balanced Input:

• 102 dB SPL @ 1m [MR524]
• 105 dB SPL @ 1m [MR624]

Maximum SPL Per Pair:

• 108 dB SPL @ 1m [MR524]
• 111 dB SPL @ 1m [MR624]

Transducers        

• Low Frequency: 5.25 in / 133 mm polypropylene woofer [MR524]
• 6.5 in / 165 mm polypropylene woofer [MR624]
• High Frequency: Neodymium magnet driven, 1 in / 25 mm silk dome tweeter

Amplifiers
Low Frequency Power:

• 30 watts, 4 Ω load, 60 watts peak [MR524]
• 40 watts, 4 Ω load, 80 watts peak [MR624]
• 55 watts, 4 Ω load, 110 watts peak [MR824]

High Frequency Power:

• 20 watts, 6 Ω load, 40 watts peak [MR524]
• 25 watts, 6 Ω load, 50 watts peak [MR624]
• 30 watts, 6 Ω load, 60 watts peak [MR824]
• Type: Monolithic IC, Class AB with DMOS power stage

Electronic Crossover

• Crossover Type: 24 dB/octave
• Crossover Frequency:
• 2 kHz [MR524]
• 3 kHz [MR624]
• Sensitivity: +4 dBu at 300 Hz for full output
• Input Impedance: 20 kΩ, balanced bridging; 10 kΩ unbalanced
• Equalization: ±2 dB @ 3 kHz and above [MR524 / 624]

AC Power Requirements       

• Power Requirements:
• ~120 V, 60 Hz
• ~220 V – 240 V, 50/60 Hz
• ~100 V, 50/60 Hz

Note: MR monitors do not support multiple voltage configurations. Make sure the voltage rating for your particular model (as indicated on the rear panel near the IEC socket) corresponds with your local AC mains voltage.

• AC Connector: 3-pin IEC 250 VAC, 15 A male Fuse:
• 115 VAC: T 1 AL / 250 V
• 230 VAC: T 500 mAL / 250 V [MR524]
• 115 VAC: T 1.6 AL / 250 V
• 230 VAC: T 800 mAL / 250 V [MR624]

Power Consumption:

• 90 watts with music, loud mix
• 10 watts quiescent (idle) [MR524]
• 120 watts with music, loud mix 11 watts quiescent (idle) [MR624]

Physical Dimensions and Weight

MR524:

• Enclosure: 0.47 in / 12 mm thick MDF with 0.83 in / 21 mm MDF front panel
• Dimensions:
• Height: 11.1 in / 281 mm
• Width: 7.1 in / 180 mm
• Depth: 8.7 in / 221 mm
• Weight: 10.2 lb / 4.6 kg

MR624:

• Enclosure:0.47 in / 12 mm thick MDF with 0.94 in / 24 mm MDF front panel
• Dimensions:
• Height: 12.9 in / 328 mm
• Width: 8.3 in / 210 mm
• Depth: 11.2 in / 284 mm
• Weight: 16.5 lb / 7.5 kg

The bundle includes the following components : 

Acoustic Isolation Foam pad for Monitors

The bundle includes an acoustic foam pad to minimize the vibrations and buzz while placed on any surface. This is a crucial element to stabilizing your studio or your initial set-up, once established the monitors remain intact throughout louder listening sessions.

2 Year Bajaao Warranty

The product is covered by a 2-Year Bajaao Extended Warranty Card ensuring safety & a dedicated support to the user.

Bajaao E-book for Studio Essentials

The bundle includes an Ebook which will include basics of home/studio setup. Building a home recording studio takes months of planning, research, and
preparation. Getting started is far easier than you might imagine. All you need is a
few basic essentials.

Bajaao Standard 1/4 Jack Standard TRS Cable - 3 Meter - Single

The Bajaao Standard Instrument Cable Straight to Straight uses Ultra High Clarity Plugs - the conductor is soldered directly to the tip with silver solder to maximize signal flow, a 99.9% pure copper low strand count conductor, 23 pF/ft low capacitance, and a 93% spiral shield for excellent RF rejection. This cable was designed for rugged stage use and to provide superior performance at a bargain price, with better sonic characteristics and performance than all instrument cables in its class.