Radial Phazer Class-A Phase Adjuster

Shop Brand : Radial Engineering
Shop All: D I Boxes

  • Radial Phazer Class-A Phase Adjuster

    The Radial Phazer is an analogue phase alignment tool that lets you bring two sound sources together so that the fundamentals play in sync. Once in phase, the results are impressive: On electric guitar; you can combine the direct feed of an amp with a room mic to create fat rich tones. On a kick drum, combine the 'attack' sound from a batter head mic with the 'boom' captured by the outer shell mic. On a snare drum, combine the top and bottom mics and on acoustic instruments, combine a close 'spot' mic with a room mic to capture textures like never before.

    The Phazer is designed from the ground up for optimum sound quality. It employs full-size 100% discreet class-A electronics to deliver the warmth and thickness that is simply not possible with chip based devices. This results in smooth, natural sounding phase curves which are particularly noticeable in the lower frequency spectrum. 0º to 180º phase adjustment is performed with a single knob making it easy to zone-in on the sweet spot. For the more adventurous, a 180º polarity reverse switch accesses the 181º to 360º range and lets you create weird to absurd 'Phazed' tonal textures. This is augmented with a variable low-pass filter that lets you focus the effect in the lower frequency spectrum - where phasing is most audible.

    Built Radial tough for the road, the Phazer is equipped with an innovative book-end design that creates a protective zone around the knobs and switches. Construction is 14-gauge steel with an internal I-beam frame that protects the sensitive electronics in even the harshest touring environments. A full bottom no-slip pad provides electrical insulation to eliminate electrical bonding and mechanical isolation to reduce mishap.

    Radial Phazer Features:

    • Low pass filter: Variable range, 300Hz ~ 3.8kHz / 3.8kHz ~ 38kHz
    • Ground lift: Disconnects XLR pin-1 at XLR output
    • Phase reverse: Inverts the signal phase at the output
    • XLR configuration: AES standard (pin-2 hot)
    • Connectors: ¼" TRS, XLR balanced inputs and outputs.

    Radial Phazer Specifications:

    • Audio circuit type: Active analog phase adustment
    • Number of channels: Mono
    • Frequency response: 20Hz ~ 20KHz (± 0.5dB)
    • Signal to noise: 77dB
    • Dynamic range: 94dB
    • Maximum input: +11.5dBu @ 1kHz, 1% THD+N
    • Total harmonic distortion: 0.005% @ 1kHz, -10dBu output
    • Input impedance: 10k Ohms, balanced
    • Output impedance: 2k Ohms, balanced
    • Construction: 14 gauge steel chassis & outer shell
    • Finish: Baked enamel.

    Specifications are subject to change without notice.



Questions about this product?

Consult a Product Specialist

Questions about this product?

Bajaao's Product Specialists are knowledgeable professionals, with musical backgrounds,extensive training and understanding of latest gear. They would be more than happy to offer you personalised advice or help you decide the right product as per your needs.