Wharfdale Pro DP-4100 Power Amplifier

DP-4100 Suitable for professional live sound reinforcement or fixed installations, the 4-channel DP-4100 delivers extreme power from a light weight box Its advanced switch mode power supply and super-efficient Class D topology delivers high power with low distortion.

With 4 discrete channels and multiple operating modes its simple to configure into the most complex of installations or touring rigs PROTECTION Internally, a full suite of protection circuitry includes thermal, over-current, DC, short circuit protect and power on/off mute.

This level of protection ensures long term system reliability and peace of mind should the worst ever happen Front panel LEDs also keep the sound engineer well informed with fault, peak and signal LEDs.

The variable speed fans keep the amplifier rack quiet when not in use - and cool while its running at high volume MODES AND SWITCHES The DP Series feature stereo, bridge and mono modes.

Use in bridge mode with an individual high-powered subwoofer or use a single DP to power your whole sound system equally Mono mode saves external cabling by splitting a single input to feed both channels of the amplifier.

In addition, gains can easily be controlled by the rear panel gain switch This allows for installation into almost any rig or venue.

The DP-4100 features XLR inputs with a maximum input level of +22dBu allowing for integration with any typical professional audio system DESIGN The 1U design allows for powerful systems to be configured in extremely confined spaces.

In the tour rack or in the amp room, DP delivers reliable power from a small box Lightweight, powerful and portable.

Its that simple! Key Features: Super light weight - Only 9.16kg 4 channel configuration Power Output 8Ω : 4 x 1000w 2 x 3400w@8Ω BTL Ultra-quiet variable speed fans Advanced protection circuitry Class D topology SPECIFICATIONS: Power Output Stereo power output 8Ω x 2 : 4 x 1000w 4Ω x 2 : 4 x 1700w Bridged mono output 16Ω : 2 x 2000w Bridged mono output 8Ω : 2 x 3400w Input sensitivity & Impedance Sensitivity : selectable 38/35/32/29dB Balanced XLR input : 20KΩ Max input level : 22dBu (9.7Vrms) Voltage gain : 38dB Slew rate : >50V / μs Crosstalk : <-90dB S/N : >109dB Distortion (1W) : <0.02% Frequency response +/-1dB @ 8Ω : 20Hz - 20kHz +/-3dB @ 8Ω : 20Hz - 30kHz Damping factor : >5000 Topology : Class D Connectors Signal input : Female XLR jacks Power output : speakON compatible Controls Front panel : AC Switch, 4 x channel gain knobs Rear panel : Parallel, Stereo & Bridge mode switch, Limiter switch Protections : Thermal, Over-current, Output DC, Output short protect.

Indicators : Power, Protect, Signal, Limiter Cooling : Variable speed fan AC Power : 90 ~ 260VAC, 50 ~ 60Hz Dimensions : 44 * 485 * 370mm Weight (Net) : 9.16kg Weight (Gross) : 11.1kg Made in United Kingdom.