Blackstar HT-Dual Tube Dual Distortion Guitar Effects Pedal

SKU : BLACKSTARHTDUAL
Save 4%
Rs. 16,853
Rs. 16,199

Or Just Rs. 2,700 Rs. for 6 months
0%* Interest EMI available for all major credit cards and Bajaj Finserv Card. Call +91-22-61235384

Limited Period Offer : Don't forget to use Coupon Code: " INSTANT4 " at checkout for additional 4% discount.

Buy Bajaao Premium Warranty at Affordable Prices. Offering door to door warranty service. T&C

Seen It For Less? Learn More

Blackstar HT-Dual Tube Dual Distortion Guitar Effects Pedal

The HT-DUAL guitar pedal offers the ultimate in high voltage valve distortion flexibility. Channel 1 has Clean or Crunch modes and can be used clean, as a boost or overdrive. Channel 2 gives distortion tones from super crunch right up to screaming lead. The unique switching operation will transform a single channel vintage amp into a three channel tone machine.

Operates at 300V HT

The HT-DUAL pedal operates on a 300V DC anode supply voltage (H.T. voltage). This is the same used in traditional valve amplifier design and means the circuit has all the compression and distortion characteristics associated with a true valve amp design and therefore 'cleans up' in the same way when you back off the volume on your guitar.

ISF Control

The patented ISF control works with the Bass, Middle and Treble controls to give you access to infinite new sound possibilities from the USA to the UK and everywhere in-between. This fully interactive control allows you to infinitely adjust the response of the tone control network between any of the traditional voicings. In this way you can design your own sound and truly find the sound in your head.

Two Channels

The HT-DUAL features two switchable channels for flexability. Channel 1 has either Clean or Crunch modes so it can be used clean, as a boost or overdrive. Channel 2 gives distortion tones from super crunch right up to screaming lead. The unique switching operation will transform a single channel vintage amp into a three channel tone machine.

Speaker Emulated Output

The Blackstar emulated output design is a new benchmark for pro direct recording. This no-compromise design makes it easy to get your tone disk and tape. You can also use it to run a line out to a PA.

Unique Switching

The unique switching operation transforms the HT-DUAL into a three channel tone machine, without the need to learn how to tap dance. Whether you're in bypass or on either channel, you're only ever a single tap away from any other selection. Many hours of research showed us that only soft switching and a buffered bypass signal will give absolutely silent switching in high gain applications.

Rugged Design

All Blackstar pedals are subjected to extensive laboratory and road testing to ensure that they are truly uncompromising in terms of reliability, quality and above all tone. You can throw them in the van and take them on the road and not have to worry.

High Integrity Buffered Bypass

The HT-DUAL's buffered bypass signal means there are no problems presented by driving long cable runs or chains of other effects.

Blackstar HT-Dual Features:

 

  • Genuine valve design
  • Operates at 300V HT
  • Cascaded valve gain stages
  • Responds like a valve amp
  • 2 channel operation
  • Clean, Crunch & Lead modes
  • Unique switching operation
  • Unique enhanced tone controls
  • Patented Infinite Shape Feature (ISF)
  • Fully equipped for stage or studio
  • Speaker emulated output
  • High integrity buffered bypass
  • Power supply included
  • Silent switching.
Click here to read our Returns Policy

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
A
A.L.
Best sounding real valve od + dist pedal

Have purchased this pedal after numerous buying and testing marathon for that genuine valve sounding distortion, tried many pedals but this pedal has been the most dynamic and warm sounding dirt pedal I have owned so far... Its two channel with separate gain and level controls but shared eq and isf knob... OD channel with gain knob at 3 gives you that crunch for classic rock and for acdc gain knob at 12 is enough...CH1 best for rythm (also solo if delay is added in the loop) and CH2 with gain at 1 o'clock is enough for that screaming distortion and ISF on the right will give you warmer Marshallish and turn it to left side and it goes towards messa type tone...like true valve amp roll down the guitar vol and it cleans up...u can also use this pedal as boost by switching off the crunch button.. to get the best result leave the pedal on for 15 mins prior and let it get warm...overall very versatile warm sounding pedal and emulated speaker outlet is add on in case u want to run it direct

A
A.L.
Best sounding real valve od + dist pedal

Have purchased this pedal after numerous buying and testing marathon for that genuine valve sounding distortion, tried many pedals but this pedal has been the most dynamic and warm sounding dirt pedal I have owned so far... Its two channel with separate gain and level controls but shared eq and isf knob... OD channel with gain knob at 3 gives you that crunch for classic rock and for acdc gain knob at 12 is enough...CH1 best for rythm (also solo if delay is added in the loop) and CH2 with gain at 1 o'clock is enough for that screaming distortion and ISF on the right will give you warmer Marshallish and turn it to left side and it goes towards messa type tone...like true valve amp roll down the guitar vol and it cleans up...u can also use this pedal as boost by switching off the crunch button.. to get the best result leave the pedal on for 15 mins prior and let it get warm...overall very versatile warm sounding pedal and emulated speaker outlet is add on in case u want to run it direct

RELATED PRODUCTS