Furman M-10X E 10A 230V Standard Power Conditioner

Furman M-10X E 10A 230V Standard Power Conditioner Overview: A Merit Series Power Conditioner is the perfect low-cost AC power solution for any rack mount system. Install an M-10x E in to the top slot of your rack, and the ten switched outlets in the rear panel will power up and protect all your equipment up to a 10-amp load.

INSTRUMENT RIGS You’ve got a rack for your effects, preamps, tuner…You’re going to plug that into the wall? One big spike and your rig is up in smoke. Furman’s standard level surge/spike protection defends your gear from the spikes and surges that are so common at gigs and practice spots.

With standard level Furman RFI/EMI filtration, you’ll get a quieter tone without pops, crackles, and the local radio station coming out of your amp. Plus, dual pull-out lamps (M-10Lx E) let you see your rack without turning the house lights on. RECORDING Can’t track down where that noise is coming from? Your mix sounding flat?

With Furman standard level RFI/EMI filtration you’ll lower the noise floor caused by the dirty AC power coming into your console or DAW .