The Line 6 DT50 112 Guitar Combo Amp is the most compact of the DT50 series with an amplification system that is able to configure and adapt its analog components and digital modeling in real time.
This means that when you select a model, the DT50 112 Amp instantly reconfigures the tube power section to provide the optimal tone. The digital section monitors the tube power section and can adjust the DSP in real-time.
At high volumes, the tubes provide more distortion. At low volumes, the modeling delivers more of the coloration. The digital section now "talks" to the analog section, and vice versa.
Matched with a custom Celestion speaker, the DT50 112 gives you great tone and authentic feel at all volumes all the time.
Line 6 DT50 Features:
Advanced HD modeling technology
Reinhold Bogner's most flexible tube design
2 - 12AX7 preamp tubes
2 EL34 power amp
Selectable 25W/50W outputs
Simple and straightforward 2-channel design
Each channel: Drive, Bass, Mid, Treble, Presence, Reverb, Channel Volume
High and Low inputs
Reconfigurable analog components (Class A/Class AB; Pentode/Triode)
Complete, one-touch analog reconfiguration (via Channel select switch)
1x12" Celestion custom G12H90 speaker
L6 LINK in/thru connection for POD HD integration
Serial effect loop with level control
Footswitch jack for channel switching
XLR direct out with cabinet simulation and ground lift switch
Line 6 DT50 Specifications:
Amp Type: Adaptive
Modeling: Line 6 HD Modeling
Tube Section: 2x12AX7 Preamp; 2xEL34 Power Amp Designed by Reinhold Bogner
Voicings: Selectable, (Cathode or Fixed Bias)
Bias Types: Type I (Tight Feedback, California Clean) Type II (Looser Feedback, Crunchy British Feel) Type III (Zero Negative Feedback, Chimey Brit Feel) Type IV (Modern Feedback, Higher Gain)
Operating Class and Wattage: Selectable: Class A (25W) <> Class AB (50W)
Power Tube Config: Selectable: Pentode <> Triode
Speaker: Custom Celestion G12H90
Foot Controller: POD HD300/400/500 via L6 LINK; Standard 1/4" Tip-Sleeve Footswitch for Channel Switching
Other I/O: Serial FX Loop, MIDI IN/OUT, Cabinet Simulated Direct Out