Sennheiser XSW D XLR BASE SET Digital Wireless Plug On Microphone System with No Mic

Sennheiser XSW D XLR BASE SET Digital Wireless Plug On Microphone System with No Mic Overview: The Sennheiser XSW-D XLR BASE SET is an easy entry point into the world of wireless microphone audio for singers, vocalists, and presenters looking for a stage-ready system that's both cost effective and simple to use It puts world-renowned Sennheiser wireless sound quality in a miniaturized, plug-and-go, 1-button digital system that anyone can operate.

Plug it in, power it up, and you're immediately up and running, streamlining your setup so you can concentrate on delivering your performance with confidence The XSW-D XLR BASE SET comes with a plug-on transmitter ready to be used with a handheld dynamic microphone of your choice.

The XLR-equipped, plug-in receiver connects to a wide variety of professional audio gear, including mixing boards and portable PA systems, allowing you to capture crisp-sounding vocals on stage, or in rehearsals, houses of worship, and event spaces One-touch ease-of-use wireless audio set that utilizes a digital transmission to seamlessly link audio sources.

This elegant solution makes going wireless with a dynamic vocal microphone easier than ever before while maintaining a reliable connection One touch ease-of-use 2.4 GHz digital transmission for worldwide operation 75m range (250ft) in optimal conditions Up to 5 hours battery life on a single charge Switch between multiple transmitters linked to one receiver Configure any combination of transmitters and receivers Mute from either transmitter or receiver Specifications: Dimensions XSW-D XLR FEMALE TX: approx.

102 x 24 x 28 mm XSW-D MINI JACK TX: approx 86 x 24 x 28 mm XSW-D INSTRUMENT TX: approx.

122 x 24 x 28 mm XSW-D XLR MALE RX: approx 109 x 24 x 28 mm XSW-D MINI JACK RX: approx.

86 x 24 x 28 mm XSW-D INSTRUMENT RX: approx 122 x 24 x 28 mm XSW-D PEDALBOARD RX: approx.

130 x 82 x 51 mm THD, total harmonic distortion < 0.1 % Charging time typ 3 h Audio output max.

12 dBu Operating temperature -10 °C to +55 °C (14 °F to 131 °F) Signal-to-noise ratio ≥ 106 dB Operating time up to 5 h Modulation GFSK with TDMA Battery Specification Li-Ion Capacity 850 mAh Codecs aptX® Live Frequency range 2,400 - 2,483.5MHz Max Input voltage typ.

5.0 V Transmission power max 10 mW Voltage 3.7 V Operating relative humidity 95 % (non-condensing) Latency < 4 ms Temperature Range 0 °C - 60 °C (32 °F - 140 °F) Audio frequency response 3.5 mm Jack/XLR: 80 - 18,000 Hz 6.3 mm Jack: 10 - 18,000 Hz What's in the Box XSW-D XLR female transmitter XSW-D XLR male receiver USB-A to USB-C charging cable Made in Germany.