Shure AXT630 Axient Antenna Distribution System

Buy Shure AXT630 Axient Antenna Distribution System online in India - India's music equipment superstore _x005F Shure AXT630 Axient Antenna Distribution System.

_x005F The AXT630 Axient Antenna Distribution Amplifier delivers ultra linear amplification and precision filtering for optimal performance in even the most difficult RF environments The AXT630 features selectable 60 MHz input filters that match the available frequency bands of Axient transmitters, providing extra protection from strong out-of-band signals and a lower overall RF noise floor.

Four BNC antenna output pairs distribute filtered signal to receivers, and an unfiltered RF cascade port is included to connect wideband devices like the Axient Spectrum Manager Networkable via Ethernet connection, the AXT630 enables WWB6 control of filtering ranges, antenna power and attenuation.

_x005F Shure AXT630 Features: _x005F RF Optimization _x005F Ultra-linear distribution amp handles high signal levels without distortion _x005F Selectable input filtering provides system-wide protection against strong out-of-band signals.

_x005F Filter ranges are matched to Axient transmitter bands _x005F Wideband filtering option covers multiple bands.

_x005F Up to 15 dB selectable RF attenuation for signal-to-noise optimization _x005F Connectivity _x005F Front panel interface and WWB6 control provides easy setup and control of filtering, antenna power and attenuation.

_x005F BNC outputs: 4 antenna output pairs _x005F Unfiltered RF cascade port with selectable 3 dB make-up gain for connecting wideband devices.

_x005F Ethernet networking: 2 PoE-enabled Ethernet ports _x005F IEC in/out power ports enable daisy-chaining of AC power.

_x005F Shure AXT630 Specifications: _x005F Dimensions 44 mm x 483 mm x 366 mm, H x W x D _x005F Housing Steel; Extruded aluminum _x005F Operating Temperature Range -18°C to 63°C _x005F Storage Temperature Range -29°C to 74°C _x005F Power Requirements 100 to 240 V AC, 50 – 60 Hz _x005F Current Drain 1.0 A RMS (referenced at 120 V AC) _x005F RF Input _x005F Connector Type BNC _x005F Configuration Unbalanced, active _x005F Impedance 50 ? _x005F Bias Voltage 12 V DC, 150 mA (300 mA maximum) _x005F RF Frequency Range _x005F AXT 630: 470 – 698 MHz _x005F AXT 631: 606 – 814 MHz.

_x005F Distribution Output _x005F Connector Type BNC (4 pairs) _x005F Configuration Unbalanced, active _x005F Impedance 50 ? _x005F Gain Adjustment Range Cascade enabled: -15 dB to 0 dB (In 1 dB steps) _x005F Cascade disabled: -12 dB to +3 dB (In 1 dB steps) _x005F Output Intercept Point >25 dBm, typical _x005F Cascade Output _x005F Connector Type BNC (1 pair) _x005F Configuration Unbalanced, wideband _x005F Impedance 50 ? _x005F Insertion Loss _x005F Networking _x005F Power Over Ethernet (PoE) 50 V DC, Class 1 _x005F Network Interface Dual Port Ethernet 10/100 Mbps _x005F Network Addressing Capability DHCP or Manual IP address.

_x005F Made in China.