ThermalTake Water 3.0 ARGB Sync All In One Liquid CPU Cooler With PWM Fan - 120mm

ThermalTake Water 3.0 ARGB Sync All In One Liquid CPU Cooler With PWM Fan Overview: All-in-one liquid cooler with PWM fan that supports 5V RGB capable motherboards WATER 3.0 ARGB The Water 3.0 ARGB Sync CPU cooler, is an all-in-one cooling solution that is available in either 120mm, 240mm or 360mm variants.

Able to provide an alternative cooling solution to standard air cooling, the Water 3.0 is a perfect fit for achieving higher performance in any system It’s also a fantastic choice for those that can’t get enough RGB lighting in their build; thanks to the included Pure ARGB 5 volt radiator fans, switching between different lighting effects and colour options has never looked this good Tt LCS Certified Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design and hardcore enthusiasts standards that a true LCS chassis should be held to.

The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features and fitment Pure 12 ARGB Sync Radiator Fan Water 3.0 ARGB Sync Edition is equipped with Thermaltake Pure 12 ARGB Sync Radiator Fan.

It features compression blades, hydraulic bearing, and a 16.8 million colors LED ring with 9 addressable LEDs that is ready to sync with 5V RGB capable motherboards from Asus, Gigabyte, MSI and AsRock Switch LED Modes with ARGB Controller The ARGB controller allows users to switch LED modes, LED colors, and LED Speeds when using a motherboard without a 5V addressable RGB header.

Users can switch between flow, ripple, pulse, blink, wave, full light, RGB spectrum, and off modes with various colors and LED speeds options *The maximum signal output for one controller is 90 addressable LEDs.

High Efficiency Radiator Specially designed for Water 3.0 ARGB Series, the large surface radiator increases the cooling surface and exceptional heat dissipation High Performance Waterblock The high performance copper base plate accelerates the heat conductivity.

The pre-refilled coolant reduces any stress from liquid replenishment hassle Additionally, the reinforced sleeved cable delivers the best durability and prevents the tubing from any damages.

High Quality Pump The high quality and reliable pump enables the maximum amount of water circulation, keeping the copper plate continuously cool The low evaporation tube effectively decreases the loss of coolant; therefore, no refill is required.

Easy Installation Featuring the latest cooling performance, the self-contained design of the Thermaltake Water 3.0 ARGB Sync Edition Series provides an easy installation system and a totally maintenance-free operation, requiring only the minimum amount of space in the chassis Specifications: WEIGHT: 920 g PUMP Motor Speed: 3000 RPM, 3600 RPM Rated Voltage: 12 V & 5V Power Input: 12V – 3.9 W , 5V – 1.06 W WATER BLOCK: Material: Copper FAN Dimension: 120 x 120 x 25 mm Speed: PWM 500~1500 R.P.M (2510-4PIN) Noise Level: 25.8 dB-A Rated Voltage: 12 V & 5V Power Input: 12V- 1.44 W, 5V – 1.6W (One Fan) Max.

Air Flow: 56.45 CFM Max Pressure: 1.59 mm-H2O LED Control: ARGB controller or 5V addressable RGB header on motherboard TUBE Length: 326mm Material: Rubber RADIATOR: Dimension: 151 x 120 x 27 mm COMPATIBILITY Intel: LGA 2066/20113/2011/1366/1200/1156/1155/1151/1150/775 AMD: FM2/FM1/AM4/AM3+/AM3/AM2+/AM2 (CPU Socket) Made in China.