Alto APX2000 2000W 4CH Professional Power Amplifier

Alto APX2000 2000W 4CH Professional Power Amplifier

This item is out of stock


Alto APX2000 2000W 4CH Professional Power Amplifier

The APX2000 brings up to four channels of dependable, continuous, clean power to any live performance. If you are a sound contractor, gigging musician or live sound engineer in need of a strong amp that provides consistently clean power, the APX2000 is an ideal choice. The APX2000 can be configured for deliver of 4 x 400 watts at 4 ohms, 4 x 250 watts at 8 ohms or in bridged mode, where the APX2000 pumps out 2 x 1000 watts of crystal-clear power. Because it is class D, APX2000 gives you all the purity reliability of a professional amp without breaking your back just to lift it. Weighing in at only 17.6 lbs., the APX2000 goes into venues with amazing ease and convenience whether used in a permanent installation or portable application.

Things can sometimes move at light speed on the stage. Connecting an amp should never slow you down. Balanced, combo ¹⁄₄” XLR inputs, "Touch-proof" binding posts and speak-on jacks make connecting the APX2000 a snap at any gig, so you never lose precious time getting things going. Once installed, the APX2000's level and clip indicators are designed to keep you informed of performance levels at a glance.

The APX2000 amplifier supplies massive power with plenty of headroom to drive any passive speaker.

The APX2000 also contains low-noise cooling fans to prevent overheating and high-current toroidal transformers for the lowest possible noise floor.

Experience the APX2000 for yourself, or check out the APX3000 for installations and gigs with larger 4-channel power requirements. For 2-channel applications, the APX1000 and APX1500 are also available from the Alto Professional APX line.4-CHANNEL 2000 WATT POWER AMPLIFIER

Features:

  • 2 x 1000 Watts at 8 Ω bridged
  • 4 x 400 Watts at 4 Ω; 4 x 250 Watts at 8 Ω
  • Efficient Class D power
  • Lightweight, two rack-space design
  • Balanced combo input jacks
  • Easy-to-read LED level and clip indicators
  • Low pass filter
  • Low-noise cooling fans

Applications:

  • Live sound systems
  • DJ systems
  • Touring rigs
  • Installations
  • Arenas and stadiums
  • Houses of worship

Technical Information:

  • Power Specifications: Continuous power: 4 x 400 W at 4 ohms, 4 x 250 W at 8 ohms (0.5% THD); 2 x 1000 W at 8 0hms (Bridged mono mode)
  • Input Sensitivity: 1.0 V
  • Input Impedance: 10 K Unbalanced
  • Frequency Response: (at 10 dB below rated output power) 20 Hz - 25 kHz (+0/-3 dB)
  • Voltage Gain: 32 dB
  • Distortion: (SMPTE-1M) <0.5%
  • S/N Ratio: 110 dB
  • Protection: On/Off, mute, DC-fault, load
  • Controls Front: Front Controls: AC power switch, 2 channel level control; –∞ to +30 dB 
  • Controls Rear: 30 Hz high-pass filter on/off, bridge/stereo/parallel mode
  • Signal Indicators: Signal present (green LED), clip (red LED), protection (red LED)
  • Power Indicators: 1 blue LED integrated with power switch
  • Input Connectors: Balanced XLR-F / ¼” combo
  • Output: Touch proof binding posts and Speakon® NL4 connectors
  • Power Supply: AC Power: 100 VAC, or 110 – 120 VAC or 220 - 240 VAC (50 / 60 Hz)
  • Dimensions (WxLxH): 19in x 11in x 3.5in
  • Weight: 17.6 lb

Shop, buy and review Alto APX2000 2000W 4CH Professional Power Amplifier at the lowest discount price in India with free shipping, EMI from authorized offical dealer with moneyback guarantee.