Presonus R80 Studio Monitors - Pair


Shop Brand : Presonus
SKU : PRESONUSR80

  • PreSonus R80 active studio monitors are fitted with a custom 6.8" Air Motion Transformer ribbon tweeter that delivers superb transient response and ultra-low distortion. The R80's custom-coated 8" woven Kevlar LF driver provides more dynamic output than conventional woofer designs, thanks in part to the rigid cone's superior ability to maintain a more constant dispersion pattern across its frequency response range. Amplified by 100-watt RMS of Class D amplification driving the woofer and 50-watt RMS driving the tweeter, the R80 gives you exceptionally transparent sound with reduced reflections.

    Superior clarity and transient response
    To achieve high-frequency resonance-peak damping, many manufacturers inject conventional dome tweeters with fluid that raises mass, and in the process, sacrifice transient response time. The custom AMT tweeter in the PreSonus R80 uses an ultra-thin, folded Kapton membrane with an inlaid aluminum circuit that functions as the voice coil; this lets the tweeter move concurrently with the electric current. The result is most impressive clarity and superior transient reproduction that will make marathon sessions less fatiguing and give you better mixes.

    Excellent dispersion and stereo imaging
    As compared with traditional 1" dome tweeters, which provide a small projection area, an unfolded AMT tweeter diaphragm delivers between eight and 13 times the projection area - considerably larger coverage. This means you'll enjoy a much wider stereo soundstage with the PreSonus R80 than traditional designs can provide. The R80 exhibits wide lateral dispersion and very limited vertical dispersion. Narrow vertical dispersion reduces reflections from your ceiling and work surface that can cause smearing due to phase incoherence. The R80's broad, even horizontal, dispersion gives you a wide sweet spot. And being less sensitive to room-aberration interference, R80s perform more predictably and sound more consistent from room to room.

    Presonus Eris R80 Features:

    Components and construction:
    • 2-way active AMT design provides articulate high-frequency response and wide stereo imaging
    • Custom-designed, 6.8-inch, AMT ribbon tweeter responds to the subtlest waveforms and the highest frequencies
    • 8-inch Kevlar LF drivers provide transparent mid- and low-frequency reproduction for clean sound and punchy bass
    • Balanced XLR and ¼-inch TRS plus unbalanced RCA inputs provide flexibility for seamless integration into any environment
    User controls:
    • Acoustic Space settings (Linear, -1.5 dB, -3 dB, -6 dB) compensate for room placement
    Power and safety:
    • Biamped 150W RMS (LF = 100W, HF = 50W), Class D power amplifier with switching power supply
    • RF interference, output current limiting, over temperature, turn-on/off transient, and subsonic filter protection
    • Energy Conservation Mode (with enable/disable) lowers standby power to <0.5W
    • External mains fuse
    • Internal power supply with IEC connector
    Presonus Eris R80 Specification:

    Inputs:
    • 1- Balanced XLR
    • 1- Balanced ¼” TRS
    • 1- Unbalanced RCA
    Performance:
    • Frequency Response: 40 Hz – 22 kHz
    • Crossover Frequency: 2.6 kHz
    • LF Amplifier Power: 100W Class D
    • HF Amplifier Power: 50W Class D
    • Peak SPL (@ 1 meter): 107 dB
    • LF Driver: 8” Kevlar®
    • HF Driver Type: AMT
    • Diaphragm: 6.8-inch2 (4,400 mm2)
    • Equiv. Diaphragm ø: 3” (75 mm)
    • Input Impedance: 20 kΩ balanced, 10 kΩ unbalanced
    • SNR (typical, A-weighted): >100 dB
    Power:
    • Factory preprogrammed: 100-120V ~50/60 Hz or 220-240V ~50/60 Hz
    • Standby Power: < 0.5W
    Protection:
    • RF interference
    • Output-current limiting
    • Over-temperature
    • Turn-on/off transient
    • Subsonic filter
    • External mains fuse
    User Controls:
    • Volume Range: A-type taper
    • HF Driver: Linear, +1 dB, -3 dB, -6 dB
    • Highpass filter: Linear, 60 Hz, 80 Hz, 100 Hz
    • Acoustic Space: Linear, -1.5 dB, -3 dB, -6 dB
    • Energy Conservation Mode: On/Off/Query
    Cabinet:
    • Vinyl-laminated, medium-density fiberboard
    Physical:
    • Width: 9.5” (241 mm)
    • Depth: 12” (309 mm)
    • Height: 15” (379 mm)
    • Weight: 19.8 lbs (9 kg)

    RELATED PRODUCTS



    YOU MIGHT LIKE THESE PRODUCTS

    Frequently Bought Together with Monitors/Speakers.

    2% OFF
    Bespeco SLJF600 Jack Mono To XLR 3 Pole Female - 6 Metres Bespeco SLJF600 Jack Mono To XLR 3 Pole Female - 6 Metres
    MRP : Rs. 608.00
    BAJAAO PRICE : Rs. 595.00
    38% OFF
    BAJAAO Standard Instrument Cable - 3 Meter BAJAAO Standard Instrument Cable - 3 Meter
    MRP : Rs. 650.00
    BAJAAO PRICE : Rs. 400.00
    98% OFF
    Aurica Wedge Shaped Sound Proofing Acoustic Foam 1' x 1' x 2 Aurica Wedge Shaped Sound Proofing Acoustic Foam 1' x 1' x 2"
    MRP : Rs. 900.00
    BAJAAO PRICE : Rs. 390.00
    38% OFF
    BAJAAO Standard Instrument Cable - 3 Meter BAJAAO Standard Instrument Cable - 3 Meter
    MRP : Rs. 650.00
    BAJAAO PRICE : Rs. 400.00
    98% OFF
    Aurica Pyramid Shaped Sound Proofing Acoustic Foam Panel 2'x2'x2 Aurica Pyramid Shaped Sound Proofing Acoustic Foam Panel 2'x2'x2"
    MRP : Rs. 2,400.00
    BAJAAO PRICE : Rs. 576.00
    11% OFF
    Focusrite Scarlett Solo 2in/2out Audio Interface - (2nd Gen) Focusrite Scarlett Solo 2in/2out Audio Interface - (2nd Gen)
    MRP : Rs. 9,060.00
    BAJAAO PRICE : Rs. 8,104.00
    10% OFF
    PreSonus AudioBox iTwo USB 2.0 & iPad Recording Interface PreSonus AudioBox iTwo USB 2.0 & iPad Recording Interface
    MRP : Rs. 14,000.00
    BAJAAO PRICE : Rs. 12,600.00
    CLICK TO CALL OUR PRODUCT SPECIALISTS