Earthquaker Devices Disaster Transport SR Guitar Effects Pedal

Earthquaker Devices Disaster Transport SR Guitar Effects Pedal

EMI starts from Rs. 2,657.90. Click here for options.


The Disaster Transport Sr is the much anticipated and updated reissue of the limited run Ghost Disaster pedal from 2010. Unlike the first version, which combined our Ghost Echo and Disaster Transport Jr., the Disaster Transport Sr was designed from the ground up to create an intense wash of  lo-fi swirling tape styled echo. It features one darker 600ms modulated delay and one slightly brighter 300ms delay with reverb. Both delays can be run separately, in parallel or series (via the bleed control). When used in series/parallel, the SR will create awesome multi-head style rhythmic delays. In addition to being used as a straight delay, straight reverb, rhythmic delay, modulated delay and old school tape-style echo, it can also be used to create a wide variety of wacky sounds ranging from warped records, clanging flange, smooth chorus, echoed out squalls and various other-worldly effects that are unlike anything else. The switching was designed so each delay can be used individually or in tandem with both true bypass or trails. If you are a fan of old school tape delay and wild lo-fi sounds, you will get hours of enjoyment every time you plug into the Disaster Transport Sr.

Hand made one at a time in sunny Akron, Ohio USA.

Delay A Controls:
    • Time- Controls the delay time from about 30ms up to 600ms.
    • Repeats- Controls how many regenerations of the signal there are. This ranges from one single repeat through an endless wash into self oscillation. This can also be controlled via an expression pedal. The Moog EP-2 is recommended.
    • Mix- Level control for the wet signal. Unity is around center, anything above is boosted. Boosting this works great when using a distorted signal. Please keep in mind this is a gain control, a bit of hiss is normal when itÕs above unity.
    • Depth- Controls the intensity of the modulation. From no modulation to all out seasick pitch bends.
    • Rate- Controls the rate of the modulation. The LED for delay A flashes in time with the modulation to visually show where the rate is set.
    • Bleed- This feeds delay A into delay B, post reverb (see block diagram for vi- sual explanation). Use this control for series or series/parallel operation to create rhythmic repeats, extra long delay time or an all out echo wash. This can also be controlled via an expression pedal. The Moog EP-2 is recommended. When using the bleed, experiment with the repeat controls on each delay line. Try using them in different settings, both together and individually, for different timing and textures.

Delay B Controls:
    • Reverb- ontrols the amount of reverb added to the input of delay B.
    • Mix- Level control for the wet signal. Unity is around center, anything above is boosted. Boosting this works great when using a distorted signal. Please keep in mind this is a gain control, a bit of hiss is normal when itÕs above unity.
    • Repeats- Controls how many regenerations of the signal there are. This ranges from one single repeat through an endless wash into self oscillation.
    • Time- Controls the delay time from about 30ms up to 300ms.

Switching
    • The switches for both delays switch the inputs only. The outputs are always connected. This allows you to have trails by always leaving the bypass switch engaged or to use the bypass switch as the master on/off for true bypass. Additionally, you can feed delay A in to delay B with the bleed control without having delay B switched on for a cleaner rhythmic delay.

Power:
Any standard regulated 9-volt DC power supply with a negative center 2.1mm barrel (not included). Do not run at higher voltages! Does not use batteries.

Shop, buy and review Earthquaker Devices Disaster Transport SR Guitar Effects Pedal at the lowest discount price in India with free shipping, EMI from authorized offical dealer with moneyback guarantee.